Avail low cost highspeed broadband internet. All transactions are wireless so that anytime anywhere you can avail. All you're gonna do is download and install my PN Access network client same as for updating. I assure you no disconnections as long as your a good customer.
Requirements:
1. Smart or Globe Usb Modem / 3g Phones via PC Suite
------In case of Andriod at IPhone, available soon--------
2. For Smart, Smart Buddy sim. For Globe no need
3. Must have .Net Framework 2 installed in your pc/lappy. Just search and download it if you don't have.
For more info, online from 8am-12am.
09109468320
YM: xcn_cyberzenxx_prynxx@rocketmail.com
Please text for fast transactions.
3G speed
![[IMG]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_vCTMIIJnZqDipjltBtY31IaQuegGTYe0CIiQcx-d3eQ7ewIfCoU2JfeszinSFJkJ5vb3LM9yyqp-cX5jXizaBVwz9Npcph3hJFCX-si3omyH0Reg=s0-d)
3G Burst Mode
![[IMG]](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_vEPj4_etdsjk1jPKMHDhG5VopsbpA-uXX5AmAQw0NGEiJYcR1yTIk6wTFz-2c9y4c7InEsB3K4yEQ42nBo23bnznk_wLd-qSyAadxEPQ5sVX8=s0-d)
To download the client, click HERE.
TUTORIAL
Setting Up Your Modem Broadband:
For Globe broadband:
1. Install and run Globe Dashboard Software.
2. No need of changing settings, just connect directly even without load. Connect it via Globe Prepaid as Profile.
3. Connect your broadband.
For Smart Broadband:
1. Install and run Smartbro Dashboard Software.
2. Create a new profile but most broadband sets like this Go to Tools> Option> Profile Management> New>
Profile Name: PN Access or any name
APN: internet
Access Number: *99#
3. Save and Set as Default then OK.
4. Connect your broadband.
After Installing PN Acces Setup,
For Windows XP users:
>XP users who are experiencing problems connecting the Client, please click Disable Route Method.
>if Errors occur, check Troubleshooting Guide below.
For Windows 7 and Vista Users:
Note: If this program is used for the first time, please follow this intructions:
-from your desktop, right-click PN Access Client and select Properties and click Open File Location then a folder will appear.
-from the folder, right-click "Optimus" and select "Properties", click "Compatibility" tab above.
-at the bottom, you will see "Previlege Level" and below that, click "Run this program as an administrator" to mark it check.
-click "OK" and close all windows or folders.
1. Simply open PN Access Client found at the desktop.
Note: If this program is used for the first time, please click "Account" and enter your username and password then save. Next time you open this program, you dont have to reenter
TROUBLESHOOTING ERRORS GUIDE
============================
Run-time error 70
go to C:\program files\PN Access\
then right-click Optimus.exe and click Properties, select Compatibility above then below Privilege Level check the box beside Run This Program As Administrator. Click apply and ok. close the folder.
Open again PN Access Client in your desktop.
============================
Error with missing MSINET.OCX dependencies or MSCOMCTL
-go to C:\program files\PN Access\
-copy MSINET.OCX and MSCOMCTL.OCX
-paste the file to:
C:\windows\system32 (for 32 bit)
or C:\windows\SysWOW64 (for 64 bit)
-go to C:\program files\PN Access\
-register the ocx files by opening/running:
regmsinet.bat
and regmscomctl.bat
============================
Run-time error 53
-just reinstall the app. do not delete initial files in directory and subdirectories.
============================
Run-time error 372
-your version of MSCOMCTL.OCX or MSINET.ocx is outdated, please do the "Error with missing MSINET.OCX dependencies or MSCOMCTL" above
============================
Error on Tap Drivers
-delete the TAP driver by clicking on OPEN TOOLS then DELETE TAP32/64 DRIVERS button (select your OS version)
-reinstall TAP driver by clicking on ADD TAP32/64 DRIVERS button (select your OS version)
============================
Error on updating
-probably your MSINET.OCX is outdated.
-go to C:\program files\PN Access\
-copy MSINET.OCX
-paste the file to:
C:\windows\system32 (for 32 bit)
or C:\windows\SysWOW64 (for 64 bit)
-go to C:\program files\PN Access\
-register the ocx file by running:
regmsinet32.bat
============================
Getting an error saying "not a valid win32 application..."
-most probably your update failed, just run the RESTOREXE.exe file found at C:\program files\PN Access\ . For win7/Vista users, run the file as administrator.
YM: xcn_cyberzenxx_prynxx@rocketmail.com
Please text for fast transactions.
3G speed
3G Burst Mode
To download the client, click HERE.
TUTORIAL
Setting Up Your Modem Broadband:
For Globe broadband:
1. Install and run Globe Dashboard Software.
2. No need of changing settings, just connect directly even without load. Connect it via Globe Prepaid as Profile.
3. Connect your broadband.
For Smart Broadband:
1. Install and run Smartbro Dashboard Software.
2. Create a new profile but most broadband sets like this Go to Tools> Option> Profile Management> New>
Profile Name: PN Access or any name
APN: internet
Access Number: *99#
3. Save and Set as Default then OK.
4. Connect your broadband.
After Installing PN Acces Setup,
For Windows XP users:
1. Simply open PN Access Client found at the desktop.
Note: If this program is used for the first time, please click "Account" and enter your username and password then save. Next time you open this program, you dont have to reenter
your account. Contact the Admin for your account to have an access.
2. click on Open Tools.
3. click on Delete Tap32 Drivers then follow command prompt wizard and don't close immediately.
4. click on Add Tap32 Drivers then follow command prompt wizard and don't close immediately.
5. Select your network wether you're Smart or Globe.
6. Select only one of your desired servers. For trial account, ask the admin.
7. Select server type (TCP or UDP) but for globe only use UDP.
9. Connect your PN Access Client..
10. If your firewall asks to Block or Unblock, choose Unblock.
11. It disappears or minimizes to tray when connected, just click the PN Access Client icon in the tray if you want it back.
>Just disconnect first when shifting server.
>monitor log messages below when experiencing connection problems.
>XP users who are experiencing problems connecting the Client, please click Disable Route Method.
>if Errors occur, check Troubleshooting Guide below.
For Windows 7 and Vista Users:
Note: If this program is used for the first time, please follow this intructions:
-from your desktop, right-click PN Access Client and select Properties and click Open File Location then a folder will appear.
-from the folder, right-click "Optimus" and select "Properties", click "Compatibility" tab above.
-at the bottom, you will see "Previlege Level" and below that, click "Run this program as an administrator" to mark it check.
-click "OK" and close all windows or folders.
1. Simply open PN Access Client found at the desktop.
Note: If this program is used for the first time, please click "Account" and enter your username and password then save. Next time you open this program, you dont have to reenter
your account. Contact the Admin for your account to have an access.
2. click on Open Tools.
3. click on Delete Tap Drivers then follow command prompt wizard (select 32 bit or 64 bit for tap drivers, depends in your OS version).
4. click on Add Tap Drivers then follow command prompt wizard (select 32 bit or 64 bit for tap drivers, depends in your OS version).
5. Select your network wether you're Smart or Globe.6. Select only one of your desired servers. For trial account, ask the admin.
7. Select server type (TCP or UDP) pero for globe only use UDP.
9. Connect your PN Access Client..
10. If your firewall asks to Block or Unblock, choose Unblock.
11. It disappears or minimizes to tray when connected, just click the PN Access Client icon in the tray if you want it back.
>Just disconnect first when shifting server.
>monitor log messages below when experiencing connection problems.
>if Errors occur, check Troubleshooting Guide below.TROUBLESHOOTING ERRORS GUIDE
============================
Run-time error 70
go to C:\program files\PN Access\
then right-click Optimus.exe and click Properties, select Compatibility above then below Privilege Level check the box beside Run This Program As Administrator. Click apply and ok. close the folder.
Open again PN Access Client in your desktop.
============================
Error with missing MSINET.OCX dependencies or MSCOMCTL
-go to C:\program files\PN Access\
-copy MSINET.OCX and MSCOMCTL.OCX
-paste the file to:
C:\windows\system32 (for 32 bit)
or C:\windows\SysWOW64 (for 64 bit)
-go to C:\program files\PN Access\
-register the ocx files by opening/running:
regmsinet.bat
and regmscomctl.bat
============================
Run-time error 53
-just reinstall the app. do not delete initial files in directory and subdirectories.
============================
Run-time error 372
-your version of MSCOMCTL.OCX or MSINET.ocx is outdated, please do the "Error with missing MSINET.OCX dependencies or MSCOMCTL" above
============================
Error on Tap Drivers
-delete the TAP driver by clicking on OPEN TOOLS then DELETE TAP32/64 DRIVERS button (select your OS version)
-reinstall TAP driver by clicking on ADD TAP32/64 DRIVERS button (select your OS version)
============================
Error on updating
-probably your MSINET.OCX is outdated.
-go to C:\program files\PN Access\
-copy MSINET.OCX
-paste the file to:
C:\windows\system32 (for 32 bit)
or C:\windows\SysWOW64 (for 64 bit)
-go to C:\program files\PN Access\
-register the ocx file by running:
regmsinet32.bat
============================
Getting an error saying "not a valid win32 application..."
-most probably your update failed, just run the RESTOREXE.exe file found at C:\program files\PN Access\ . For win7/Vista users, run the file as administrator.
